Chemical delignification treatment perth

Chemical delignification is a very common problem that largely goes undetected.
It will commonly only be detected on a building inspection or in the coarse of a timber pest treatment.
Picked up on a pre purchase building inspection it can make or break the deal.
That is where asset protection comes to the rescue.

Asset Protection has been working closely together with other building inspectors and chemical delignification treatment specialists in perth for many years now.
In 2006 a treatment was perfected using a timber hardening chemical followed by linseed oil to re strengthen the timber and regain the structural integrity in your roof.
Weather it is for the sale to go ahead or jyst for peace of mind asset protection building inspections are the go to guys when it comes to the treatment of chemical delignification in perth.

What is chemical delignification

Lignin is an organic natural ‘glue’ that binds the cells which make up the timber component together.
Chemical delignification is when the lignin within the timber is destroyed, as the timber gradually weakens and finally collapses when the timber becomes defibrated.
This type of timber deterioration is also commonly referred to as ‘hairy timber’ as the fibres within the timber detach once the lignin is broken down.

What causes chemical delignification?

As suggested by the name of this type of timber deterioration, chemical delignification is caused by some form of airborne attack on the timber.

Examples of causes include:

In areas close to the sea, airborne salts attack the timber.
This process may be accelerated for homes with terracotta roof tiles, as any tile fretting will allow further amounts of contaminated moisture into the roof loft space.

Areas of high pollution, such as homes in close proximity to industrial areas or main roads, airborne pollutants will cause chemical delignification.

Another cause of chemical delignification is the release of gases into the roof loft space.
This may include the escape of gases from appliances such as slow combustion stoves or perforations to ducting from flued gas appliances.

Hot water systems located within the roof loft space may also accelerate chemical delignification.

Where will I find chemical delignification & is it a structural problem?

Chemical delignification is generally a problem associated with timber roof battens when identified within the roof loft space whilst conducting a pre-purchase building inspection.
Although chemical delignification has the potential to affect other timbers within the roof loft space, generally due to the sectional size of the roof battens accompanied with their position within the roof loft space, they are the first to suffer the effects of this chemical reaction.
If for instance a timber-framed roof had timber battens & a roof tiled covering, it would be fair to assume that a roof collapse would occur prior to any significant delignification occuring to any structural framing members.

Although chemical delignification has been associated to timbers with poor durability properties such as Douglas fir (Oregon), here in Perth we have witnessed firsthand that chemical delignification can occur to reasonably durable timbers such as Jarrah.
Generally speaking Jarrah has an above ground durability rating of 15-40 years, therefore making many homes around Perth susceptible to this risk.

Although chemical delignification takes a number of years before collapse occurs, it will be classified as a major defect whilst conducting a pre-purchase building inspection.
Furthermore, it is not recommended to walk on any roof cover when chemical delignification is identified, due to the threat of the roof cover collapsing.

It would also be prudent to consider the cause of the chemical delignification, as the cause may have bearing on the future health of occupants.

Is chemical delignification a timber pest

In short, yes it is.
Chemical delignification much like termites and other timber pests, chemical delignification attacks the timber and weakens it from the inside out, this will leave the fluffy appearance on the external face of the batten and once sanded can give the misconception that it is all fine and back to normal, but internally the structure is extremely compromised.
Chemical delignification is classed both as a timber pest and as a major structural defect and should be treated as a matter of urgency